5 Operation
Operation manual
12
FTXM20~4 FTXM20~71R2V1B
Daikin room air conditioner
3P485919-11S – 2020.06
Result:
Remaining reservations are active.
To delete a reservation for each day of the week
Use this function if you want to delete all reservation settings for one
day of the week. This can be used in confirmation or setting mode.
1
Press
.
2
Press
or
to select the day of the week to be deleted.
3
Hold
for about 5 seconds.
Result:
All reservations for the selected day are deleted.
4
Press
to exit.
Result:
Remaining reservations are active.
To delete all reservations
Use this function if you want to delete all reservations for all days of
the week in one go. This procedure CANNOT be used in the setting
mode.
1
Hold
for about 5 seconds while in the default display.
Result:
All reservations will be deleted.
5.11
Wireless LAN connection
The customer is responsible for providing:
▪ Smartphone or tablet with minimum supported version of Android
or iOS, specified on
http://www.onlinecontroller.daikineurope.com
▪ Internet line and communication device, such as a modem, router,
etc.
▪ Wireless LAN access point
▪ Installed free Daikin Residential Controller application
5.11.1
Precautions when using the wireless LAN
Do NOT use near:
▪
Medical equipment.
E.g. persons using cardiac pacemakers or
defibrillators.
This
product
may
cause
electromagnetic
interference.
▪
Auto-control equipment.
E.g. automatic doors or fire alarm
equipment. This product may cause faulty behaviour of the
equipment.
▪
Microwave oven.
It may affect wireless LAN communications.
5.11.2
To install the Daikin Residential Controller
application
1
Open:
▪ Google Play for appliances using Android.
▪ App Store for appliances using iOS.
2
Search for Daikin Residential Controller.
3
Follow the directions on the screen to install.
5.11.3
To set the wireless connection
There are two options to connect the wireless adapter with your
smart device.
▪
Connect the wireless LAN to your smart device directly.
▪
Connect the wireless LAN to your home network.
The wireless
LAN will communicate with your smart device in your home
network using a modem, router or a similar device.
For more information and FAQ refer to:
http://www.onlinecontroller.daikineurope.com/
.
1
Stop operation before setting the wireless connection.
2
Use the user interface to select the wireless LAN setting menu.
Note:
Always aim the user interface at the signal receiver on the
unit when operating the user interface.
Menu
Description
Connection status check
WPS connection setting
AP mode/RUN mode (SSID + KEY) connection
setting
Reset to factory default
Wireless LAN OFF
To confirm the wireless LAN connection status
1
On home screen menu, press and hold
for at least
5 seconds while the unit is not operating.
Result:
The SP (wireless connection setting menu) appears.
is blinking.
(5 sec.)
2
Press
to confirm the selection.
Result:
is blinking.
3
Check the operation and timer LEDs on the indoor unit display.
ON/
OFF
a
b
a
Operation LED
b
Timer LED
If operation
LED…
…and timer LED… …then wireless LAN is…
blinks
blinks
not connected
is off
blinks in 0.5 second
interval
running and ready to connect
to the home network via WPS
button on the router.
is off
blinks in 1 second
interval
▪ connected to the home
network via SSID + KEY.
or
▪ connected to the home
network via WPS button on
the router.
4
Press
to exit the menu.
Result:
The display will return to the default screen.
To connect the wireless LAN to your home
network
The wireless adapter can be connected to your home network using
the:
▪
WPS
button on the router (if present),
▪
SSID
and
KEY
number located on the unit.
To connect using the WPS button
1
On home screen menu, hold
for at least 5 seconds while
the unit is not operating.
