■
English
3
Accessories
Choosing an Installation Site
• Before choosing the installation site, obtain user approval.
1.
Indoor unit
• The indoor unit should be positioned in a place where:
1) the restrictions on the installation requirements specified in
“Indoor Unit Installation Diagram”
on page 4 are met,
2) both the air inlet and air outlet are unobstructed,
3) the unit is not exposed to direct sunlight,
4) Install so that drainage occurs easily,
5) the unit is away from sources of heat or steam,
6) there is no source of machine oil vapor (this may shorten the indoor unit service life),
7) cool/warm air is circulated throughout the room,
8) the unit is away from electronic ignition type fluorescent lamps (inverter or rapid start type) as they may affect the remote
controller range,
9) the unit is at least 3.3ft (1m) away from any television or radio set (the unit may cause interference with the picture or
sound),
10) no laundry equipment is nearby.
2.
Wireless remote controller
• Turn on all the fluorescent lamps in the room, if any, and find a location where the remote controller signals are properly
received by the indoor unit (within 23ft (7m)).
Mounting plate
1
Mounting plate
fixing screw
M4 × 1”
(M4 × 25mm)
7
Titanium apatite deodorizing
filter
2
Wireless remote
controller
1
Remote controller
holder
1
Remote controller
holder
fixing screw
M3 × 13/16”
(M3 × 20mm)
2
Dry battery AAA.
LR03 (alkaline)
2
Indoor unit fixing
screw
M4 × 1/2”
(M4 × 12mm)
2
Screw cover
2
*1
Insulation tape
1
Operation manual
1
Installation
manual
1
General safety
considerations
1
SSID sticker with
release paper
(attached to the unit)
1
Warranty
1
*1 The 18/24 class models have 3 screw covers.
A
B
C
D
E
F
G
H
J
K
L
M
N
Attach the sticker to the sticker
attachment area on the cover page
of the operation manual and keep
it safe.
*2 The installer should inform the user that it is not necessary to
attach the QR code portion of the SSID sticker.
*
2
P
Q
01_EN_3P686877-1A.fm 3 ページ ２０２２年６月１日 水曜日 午後１２時３２分
