To delete all reservations
Use this function if you want to delete all reservations for all
days of the week in one go. This procedure CANNOT be used in
the setting mode.
1.
Hold
for about 5 seconds while in the default
display.
Result:
All reservations will be deleted.
4-7 Wireless LAN connection
If using a remote control PC-board or an interface adaptor for
DIII-NET, it is necessary to switch the wireless LAN connection
adapter to OFF.
The user is responsible for providing:
•
Smartphone, tablet or another smart device with one of the
following operating systems:
•
Android 4.0.3 or later
•
iOS 7.1.2 or later
•
Internet line and communication device, such as a modem,
router, etc.
•
Wireless LAN access point
•
Installed free
Daikin Mobile Controller
application
Note:
If needed, the SSID number and the KEY are located on
the unit or can be found in the accessory bag.
a
a
Label with SSID number and password
4-7-1
Precautions when using the wireless adapter
Do NOT use near:
•
Medical equipment.
E.g. persons using cardiac
pacemakers or defibrillators. This product may cause
electromagnetic interference.
•
Auto-control equipment.
E.g. automatic doors or fire alarm
equipment. This product may cause faulty behaviour of the
equipment.
• Microwave oven.
It may affect wireless LAN communications.
4-7-2 To install the Daikin Mobile Controller application
1.
Open:
•
Google Play for appliances using Android.
•
App Store for appliances using iOS.
2.
Search for Daikin Mobile Controller.
3.
Follow the directions on the screen to install.
4-7-3
To set the wireless connection
There are 2 options to connect the wireless adapter with your
smart device.
• Connect the wireless adapter to your home network.
The wireless adapter will communicate with your smart
device in your home network using a modem, router or a
similar device.
• Connect the wireless adapter to your smart device directly.
For more information and FAQ refer to:
http://www.daikinthai.com/dmobile/index.html
1.
Stop the operation before setting the wireless connection.
To confirm the wireless adapter connection status
1.
Hold
for at least 5 seconds.
Result:
The confirmation display (menu
) appears.
2.
Press
to confirm the selection.
Result:
is blinking.
3.
Check the indoor unit LED.
…lamp is blinking.
Status
Timer
Communication is OK
Operation and timer
Communication is OFF
4.
Press
to exit the menu.
Result:
The display will return to the default screen.
To connect the wireless adapter to your home network
The wireless adapter can be connected to your home network
using the:
•
WPS
button on the router (if present).
•
SSID
and
KEY
number on the unit.
To connect using the WPS button
1.
Hold
for at least 5 seconds in the default screen.
Result:
The confirmation display (menu
) appears.
2.
Press repeatedly
or
until the WPS setting display
(menu ) appears.
14
01_EN_3P524249-1.indd 14
6/12/2018 1:47:40 PM
