![background image](http://html1.mh-extra.com/html/daikin/ftxj20a2v1bw/ftxj20a2v1bw_operation-manual_4702131011.webp)
5 Operation
Operation manual
11
FTXJ-A(W)(S)(B)
Daikin room air conditioner
3P485919-15W – 2021.12
Airflow direction setting menu
2
In this menu, perform the following airflow settings. Then press
to return to the main menu or press
to exit to the home
screen.
5.4.1
To adjust vertical airflow direction
1
In the airflow direction setting menu, navigate to the vertical
airflow screen using
and
.
2
Change the setting using
and
.
Vertical airflow - swing
Vertical airflow - fixed
3
For vertical swing.
Press
to confirm your selection.
Result:
appears on the bottom of the home screen. The
flaps (horizontal blades) will begin to swing.
4
For fixed position.
Press
when the flaps reach the desired
position.
Result:
disappears from the bottom of the home screen.
The flaps will stop moving.
5.4.2
To adjust horizontal airflow direction
1
In the airflow direction setting menu, navigate to the horizontal
airflow screen using
and
.
2
Change the setting using
and
.
Horizontal airflow - swing
Horizontal airflow - fixed
3
For horizontal swing.
Press
to confirm your selection.
Result:
appears on the bottom of the home screen. The
louvers (vertical blades) will begin to swing.
4
For fixed position.
Press
when the louvers reach the
desired position.
Result:
disappears from the bottom of the home screen.
The louvers will stop moving.
INFORMATION
When the unit is installed in a corner of a room, the
direction of the louvers should be facing away from the
wall. Efficiency will drop if a wall blocks the air.
5.4.3
To use 3D airflow direction
1
Set the vertical and the horizontal airflow to ON.
2
appears on the bottom of the home screen. The flaps
(horizontal blades) and louvers (vertical blades) will begin to
swing.
Vertical airflow ON
Horizontal airflow ON
3
To use fixed position, set the vertical and the horizontal airflow
to OFF when the flaps and louvers reach the desired position.
Result:
disappears from the bottom of the home screen.
The flaps and the louvers will stop moving.
5.4.4
To start/stop Comfort airflow operation
1
In the airflow direction setting menu, navigate to the comfort
airflow screen using
and
.
2
Change the setting using
and
.
Comfort airflow active
Comfort airflow disabled
3
Press
to confirm your selection.
Result: Comfort airflow active:
appears on the bottom of
the home screen.
Result:
Comfort airflow
disabled:
disappears from the
bottom of the home screen.
5.5
Intelligent eye operation
The system detects movement in the room and automatically adjusts
the airflow direction and temperature in order to avoid direct contact
with people. If no movement is detected for 20 minutes, the system
switches to energy saving operation:
About the Intelligent eye sensor
NOTICE
▪ Do NOT hit or push the Intelligent eye sensor. Doing so
may lead to malfunction.
▪ Do NOT place large objects near the Intelligent eye
sensor.
INFORMATION
Night set mode (OFF timer) CANNOT be used at the same
time with Intelligent eye operation.
▪
Detection range.
Up to 9 m.
▪
Detection sensitivity.
Changes according to location, the number
of persons in the room, temperature range, etc.
▪
Detection mistakes.
The sensor may mistakenly detect pets,
sunlight, moving curtains, etc.
5.5.1
To start/stop Intelligent eye operation
1
Press
to enter the main menu and navigate to the intelligent
eye screen using
and
.
2
Change the setting using
and
.