Daikin FTX09NMVJU, Service Manual

Page: 35 / 145

SiUS091601E Main Functions
Functions and Control 24
When setting the airflow selection switch to .
„
Air conditioner automatically decides the appropriate blowing pattern depending on the
operating mode/situation.
• During dry operation, air is blown upper air outlet, so that cold air does not come into direct
contact with people.
When setting the airflow selection switch to .
„
Regardless of the operating mode or situation, air is blown from the upper air outlet.
„
Use this switch when you do not want air coming out of the lower air outlet (e.g., while sleeping).
Operating mode Situation Blowing pattern
Cooling
When the operation is activated or
when the room is not fully cooled. Air is blown from the upper and
lower air outlets in order to reach
the set temperature quickly.
When the room has become fully
cool, or when 1 hour has passed
since turning on the air
conditioner. Air is blown only from the upper air
outlet so that air does not come into
direct contact with people and
indoor temperature is equalized.
Heating
When the operation is activated or
when air emitted is of low
temperature. Air is blown only from the upper air
outlet so that air does not come into
direct contact with people.
At times other than the above
situations. Air is blown from the upper and
lower air outlets so that warm air is
spread throughout the whole room.
Dry
Whenever in DRY mode. Air is blown only from the upper air
outlet so that air does not come into
direct contact with people.
Fan
Whenever in FAN mode.
Automatic
Operates in the actual operation mode of the air conditioner according to the
descriptions in this table. (COOL or HEAT)