Read before Operation
Name of Parts
■
Indoor Unit
7
G
I .,
(!)n
ON/OFF
Ci=)
■
Outdoor Unit
15
20
11
12
13
14
lffi-16
lttt-
11
llll'c"-"-----''-'---'-"-18
=
=---
-'--
6-19
Appearance of the indoor/outdoor unit may
differ between different models.
D
1. Front panel
2.Air inlet
3. Air filter
4. Accessory filter
5. Model name plate
6. Indoor temperature sensor:
• Detects the air temperature around the unit.
7.Display
8. Air outlet
9. Louvres (vertical blades):
• The louvres are inside of the air outlet.
1
O.
Flaps (horizontal blades)
11. Signal receiver:
• Receives signals from the remote controller.
• When the unit receives a signal, you will
hear a beep sound.
Case
Sound type
Operation start
beep-beep
Settings changed
beep
Operation stop
long beep
12. OPERATION lamp (green)
13. TIMER lamp (orange)
14. Indoor unit ON/OFF switch:
• Press this switch once to start operation.
Press once again to stop it.
• For the operation mode setting, refer to
the following table.
Mode Temperature Airflow rate
setting
COOL
22
°
c
AUTO
• This switch can be used when the remote
controller is missing.
15.Air inlet (back and side)
16. Refrigerant pipes and inter-unit wire
17.Drain hose
18. Earth terminal (inside)
19. Model name plate
20. Air outlet
2
