Care
Care and Cleaning
D
&CAUTION
• Before cleaning, be sure to stop the operation and turn off the circuit breaker.
• Do not touch the aluminium fins of the indoor unit. If you touch those parts, this may cause an injury.
• When removing or attaching the front panel, stand on a solid, stable base and take care not to fall.
• When removing or attaching the front panel, support the panel securely with your hand to
prevent it from falling.
Units
■
Indoor unit and remote controller
1. Wipe them with a dry soft cloth.
■
Front panel
1. Open the front panel.
• Hold the front panel by the indentations
in the unit and open the front panel.
2. Remove the front panel.
• Slide the front panel to either the left or
right and pull it toward you to disengage
one of the front panel shafts.
• Disengage the front panel shaft on
the other side in the same manner.
• After disengaging both front panel
shafts, pull the front panel toward
yourself and remove it.
3. Clean the front panel.
• Wipe it with a soft damp cloth.
• Only neutral detergent may be used.
• In case of washing the panel with water, wipe it with a dry soft cloth, and let it dry in the
shade after washing.
4. Attach the front panel.
• Align the front panel shaft on the left
and right of the front panel with the
grooves, then push them all the way in.
• Close the front panel slowly.
• Press the front panel at both sides
and the centre.
• After cleaning, make sure that the
front panel is securely fixed.
NOTE
For cleaning, do not use any of the following:
• Water hotter than 40
°
C
• Polishing compounds
• Volatile liquid such as benzene, petrol and thinner • Rough materials such as a scrubbing brush
10
