Operation
Adjusting the Airflow Rate/ SMELL PROOF Operation
Adjusting the airflow rate
You can adjust the airflow rate to increase your comfort.
■
To change the airflow rate setting
Press
[+FAN).
• Each pressing of
(otFANJ
advances the airflow rate setting in sequence.
• In DRY operation, the airflow rate setting is not variable.
SMELL PROOF operation
The SMELL PROOF operation prevents unpleasant odour inside the indoor unit. This function is
available in both DRY and COOL operation.
■
To use SMELL PROOF operation
1. Before starting the operation, press
[+FANJ
to set to Auto.
2. Press (MODE] to select the DRY or COOL operation.
3. Press�.
• Air starts circulating about 1 minute after the operation is started.
However, if the POWER CHILL operation is started, air starts circulating immediately.
NOTE
■
Note on airflow rate setting
• At smaller airflow rates, the cooling effect is also smaller.
■
Note on SMELL PROOF operation
• SMELL PROOF operation can prevent some odours, but not all.
■
Notes on the operating conditions
• The air conditioner always consumes a small amount of electricity even while ii is not operating.
• If you are not going to use the air conditioner for a long period, turn off the circuit breaker.
• Use the air conditioner in the following conditions.
Mode
Operating conditions
If operation is continued out of this range
COOL Outdoor temperature
19.4-50
°
C
Indoor temperature
1a - 32
°
c
• A safety device may work to stop the operation.
DRY
• Condensation may occur on the indoor unit and drip.
Indoor humidity
80% max.
6
