background image

 

 

 

FHYCP + FCQ
Split System air conditioners
4PW23696-1

Installation manual

 

1

C

ONTENTS

Page

Before installation .............................................................................. 1

Selecting installation site ................................................................... 2

Preparations before installation ......................................................... 2

Installation procedures for fresh air intake duct connection............... 3

Indoor unit installation........................................................................ 3

Refrigerant piping work...................................................................... 4

Drain piping work............................................................................... 4

Electric wiring work............................................................................ 5

Wiring example and how to set the remote controller........................ 5

Wiring example .................................................................................. 6

Field setting ....................................................................................... 7

Installation of the decoration panel.................................................... 8

Test operation .................................................................................... 8

Wiring diagram .................................................................................. 9

B

EFORE

 

INSTALLATION

Leave the unit inside its packaging until you reach the
installation site. Where unpacking is unavoidable, use a sling of
soft material or protective plates together with a rope when
lifting, this to avoid damage or scratches to the unit.

Refer to the installation manual of the outdoor unit for items not
described in this manual.

Caution concerning refrigerant series R-407C:
-

The connectable outdoor units must be designed exclusively 
for R-407C.

-

If outdoor units for R22, R-410A are connected, the system 
will not work properly.

Caution concerning refrigerant series R-410A:
-

The connectable outdoor units must be designed exclusively 
for R-410A.

-

If outdoor units for R22, R-407C are connected, the system 
will not work properly.

Precautions

Do not install or operate the unit in rooms mentioned below.
-

Places with mineral oil, or filled with oil vapour or spray like in 
kitchens. (Plastic parts may deteriorate.)

-

Where corrosive gas like sulphurous gas exists. (Copper 
tubing and brazed spots may corrode.)

-

Where volatile flammable gas like thinner or gasoline is used.

-

Where machines generating electromagnetic waves exist. 
(Control system may malfunction.)

-

Where the air contains high levels of salt such as air near the 
ocean and where voltage fluctuates a lot (e.g. in factories). 
Also in vehicles or vessels.

When selecting the installation site, use the supplied paper
pattern for installation.

Do not install accessories on the casing directly. Drilling holes in
the casing may damage electrical wires and consequently cause
fire.

Accessories

Check if the following accessories are included with your unit.

Optional accessories

There are two types of remote controllers: wired and wireless.
Select a remote controller according to customers request and
install in an appropriate place.
Refer to catalogues and technical literature for selecting a
suitable remote controller.

A decoration panel is also required for this indoor unit.

FHYCP
FCQ

Split System air conditioners

Installation manual

READ THESE INSTRUCTIONS CAREFULLY BEFORE
INSTALLATION. KEEP THIS MANUAL IN A HANDY
PLACE FOR FUTURE REFERENCE.

IMPROPER INSTALLATION OR ATTACHMENT OF
EQUIPMENT OR ACCESSORIES COULD RESULT IN
ELECTRIC SHOCK, SHORT-CIRCUIT, LEAKS, FIRE OR
OTHER DAMAGE TO THE EQUIPMENT. BE SURE ONLY
TO USE ACCESSORIES MADE BY DAIKIN WHICH ARE
SPECIFICALLY DESIGNED FOR USE WITH THE
EQUIPMENT AND HAVE THEM INSTALLED BY A
PROFESSIONAL.

IF UNSURE OF INSTALLATION PROCEDURES OR USE,
ALWAYS CONTACT YOUR DAIKIN DEALER FOR
ADVICE AND INFORMATION.

Also used as packing 

material

Clamp

1 pc.

Paper pattern for 

installation

1 pc.

Drain hose

1 pc.

Screws M5

For paper pattern 

for installation

4 pcs.

Washer for hanging 

bracket

8 pcs.

Sealing

2 pcs.

Insulation for fitting

1 each

Other: installation 

and operation manual

for gas pipe

for liquid pipe

Summary of Contents for FHYCP100B8V1















Reviews: