background image

Safety Considerations

This is an appliance that is not accessible to the general public.

Precautions relating to area surrounding the indoor and outdoor units

 

„

Be sure to follow the instructions below.

• 

The indoor unit is at least 3.3ft (1m) away from any television or radio set (unit may cause interference with the picture or 
sound).

• 

Refrain from using the units in areas prone to high levels of oily smoke, such as a kitchen. Water leakage may result.

  

 NOTE 

• 

Never press the button of the remote controller with 
a hard, pointed object. The remote controller may be 
damaged.

• 

Never pull or twist the electric wire of the remote controller. 
It may cause the unit to malfunction.

•  Do not place appliances that produce open flames in 

places that are exposed to the airflow of the unit or under 

the indoor unit. It may cause incomplete combustion or 
deformation of the unit due to the heat.

• 

Do not expose the controller to direct sunlight. The LCD 
display can become discolored and may fail to display the 
data.

• 

Do not wipe the controller operation panel with benzene, 
thinner, chemical dust cloth, etc. The panel may get 
discolored or the coating can peel off. If it is heavily dirty, 
soak a cloth in a water-diluted neutral detergent, squeeze 
it well and wipe the panel clean. Then wipe it with another 
dry cloth.

• 

Dismantling of the unit, disposal of the refrigerant, oil, and 
additional parts, should be done in accordance with the 
relevant local, state, and national regulations.

•  Operate the air conditioner or heat pump in a sufficiently 

ventilated area and not surrounded by obstacles. Do 
not use the air conditioner or heat pump in the following 
places.

a. Places with a mist of mineral oil, such as cutting oil.
b.  Locations such as coastal areas where there is a lot of 

salt in the air.

c.   Locations such as hot springs where there is a lot of 

sulfur in the air.

d.  Locations such as factories where the power voltage 

varies a lot.

e.  In cars, boats, and other vehicles.
f.   Locations such as kitchens where oil may splatter or 

where there is steam in the air.

g.  Locations where equipment produces electromagnetic 

waves.

h. Places with an acid or alkaline mist.
i.   Places where fallen leaves can accumulate or where 

weeds can grow.

• 

Take snow protection measures. Contact your dealer for 
the details of snow protection measures, such as the use 
of a snow protection hood.

• 

Do not attempt to do electrical work or grounding work 
unless you are licensed to do so. Consult with your dealer 
for electrical work and grounding work.

• 

Pay attention to operating sound. Be sure to use the 
following places:

a.  Places that can sufficiently withstand the weight of 

the air conditioner or heat pump yet can suppress the 
operating sound and vibration.

b.  Places where warm air from the air outlet of the outdoor 

unit or the operating sound of the outdoor unit does not 
annoy neighbors.

• 

Make sure that there are no obstacles close to the outdoor 

unit. Obstacles close to the outdoor unit may drop the 

performance of the outdoor unit or increase the operating 
sound of the outdoor unit.

• 

Consult your dealer if the air conditioner or heat pump in 
operation generates unusual noise.

• 

Make sure that the drainpipe is installed properly to drain 
water. If no water is discharged from the drainpipe while 
the air conditioner or heat pump is in the cooling mode, 
the drainpipe may be clogged with dust or dirt and water 
leakage from the indoor unit may occur. Stop operating 
the air conditioner or heat pump and contact your dealer.

FFP001-U

       English

01_EN_3P500431-1.indd   3

10/12/2017   11:57:49

Summary of Contents for FDMQ12RVJU













Reviews: