background image

Case

Description / what to check

An abnormal functioning happens 

during operation�

 •  The air conditioner may malfunction with lightning or radio waves. Turn the breaker OFF, turn it 

ON again and try operating the air conditioner with the remote controller.

Notes on the operating conditions

• 

If operation continues under any conditions other than those listed in the 
table,

−  A safety device may activate to stop the operation.
−  Dew may form on the indoor unit and drip from it when COOL or DRY 

operation is selected.

Mode

Operating conditions

COOL / DRY

Outdoor temperature: 50-115°F (10-46°C)

Indoor temperature: 64-90°F (18-32°C)

Indoor humidity: 80% max.

HEAT

Outdoor temperature:  [RX]: 5-75°F (–15-24°C) 

 

[RXL]: –13-75°F (–25-24°C)

Indoor temperature: 50-86°F (10-30°C)

„

 Call your dealer immediately

 WARNING

When an abnormality (such as a burning smell) occurs, stop operation and turn off the circuit breaker�

•  Continued operation in an abnormal condition may result in problems, electric shock or fire.
• 

Consult the dealer where you bought the air conditioner.

Do not attempt to repair or modify the air conditioner by yourself�

•  Incorrect work may result in electric shock or fire.
• 

Consult the dealer where you bought the air conditioner.

If one of the following symptoms takes place, call your dealer immediately�

•  The power cord is abnormally hot or damaged.
•  An abnormal sound is heard during operation.
•  The circuit breaker cuts off the operation frequently.
•  A switch or a button often fails to work properly.
•  There is a burning smell.
•  Water leaks from the indoor unit.

Turn off the circuit breaker and call your dealer.

„

 After a power failure

  • The air conditioner automatically resumes operation in about 3 minutes. You should just wait for a while.

„

 Lightning

  • If there is a risk lightning could strike in the neighborhood, stop operation and turn off the circuit breaker to protect the 

system.

„

 Disposal requirements

 

• Dismantling of the unit, handling of the refrigerant, oil and other parts, should be done in accordance with the relevant local 

and national regulations.

English 10

English

01_EN_3P500431-1.indd   10

10/12/2017   11:57:51

Summary of Contents for FDMQ12RVJU













Reviews: