How to clean air outlet, outside panels and remote controller
1.
Clean with soft cloth�
2.
When it is difficult to remove stains, use water or neutral
detergent�
NOTE
•
Do not wash the suction grille with water of 122°F (50°C) or higher�
It may cause discoloration and deformation�
• When drying the suction grille, do not heat it with fire. It may cause burning.
•
Do not use substances such as gasoline, benzene, thinner, polishing powder and liquid insecticide sold in the market�
It may cause discoloration and deformation�
Prior to a long period of non-use
1.
Operate the FAN mode for several hours on a fine day to dry out
the inside�
1)
Press the “MODE” selector button and select “FAN” operation.
• When a multi outdoor unit is connected, make sure the HEAT operation is not being used in other rooms before you
use the FAN operation.
Page 5
2)
Press the “ON/OFF” button and start operation.
2.
After operation stops, turn off the circuit breaker for the room
air conditioner�
3.
Clean the air filters and reattach them.
Page 7
4.
To prevent battery leakage, take out the batteries from the
remote controller� (Only for the wireless remote controller)
We recommend periodical maintenance
•
In certain operating conditions, the inside of the air conditioner may get foul after several seasons of use, resulting in poor
performance. It is recommended to have periodical maintenance by a specialist.
•
For specialist maintenance, please contact the dealer where you bought the air conditioner.
•
The maintenance cost must be borne by the user.
English 8
English
01_EN_3P500431-1.indd 8
10/12/2017 11:57:50
