background image

Do not install the air conditioner at any place

where there is a danger of flammable gas 

leakage.

In the event of a gas leakage, build-up of gas

near the air conditioner may result in a fire.  

Carry out drain piping properly to ensure 

complete drainage.
If drain piping is not carried out properly, drain 
will not flow out. Then, dirt and debris may be 
accumulated in the drain piping and may cause 
water leakage. If it occurs, stop the air conditioner 
and call your local dealer for assistance.

2

.

  WHAT

 

TO

 

DO

 

BEFORE

OPERATION

This operation manual is for the following system 
with standard control. Before initiating operation, 
contact your local dealer for the operation that 
corresponds to your system

Indoor unit

Outdoor unit

Unit with

remote

controller

Unit without remote

controller

(When used as

simultaneous

operation system)

• 

Heat pump type
This system provides COOLING, HEATING, 
AUTOMATIC, PROGRAM DRY, and FAN
OPERATION modes.

 

 

 

• 

Cooling only type 
This system provides COOLING, 
and FAN OPERATION modes.

 

4

Do not remove the outdoor unit’s outlet side 

grille.
The grille protects against the unit’s high speed 
fan, which may cause injury.
To avoid injury, do not touch the air inlet or 

aluminum fins of the air conditioner.
Do not place objects that are susceptible 

to moisture directly beneath the indoor or 

outdoor units.
Under certain conditions, condensation on the 
unit or refrigerant piping, air filter dirt or drain 
blockage may cause dripping, resulting in fouling 
or failure of the object concerned.
Do not place heaters directly below the 

indoor unit, as resulting heat can cause 

deformation.
Do not place appliances that produce naked 

flames in places exposed to the airflow 

from the air conditioner as this may impair 

combustion of the burner.
Do not block air inlets nor outlets.
Impaired airflow may result in insufficient 
performance or trouble.
Do not use the air conditioner for purposes 

other than those for which it is intended.
Do not use the air conditioner for cooling 
precision instruments, food, plants, animals or 
works of art as this may adversely affect the 
performance, quality and/or longevity of the 
object concerned.

  After prolonged use, check the unit stand and 

 its mounts for damage.
 If left in a damaged condition, the unit may fall 
 and cause injury. 

   Arrange the drain hose to ensure smooth 
   drainage. 

 Imperfect drainage may cause wetting of the 

building, furniture etc. 

   Do not sit or place objects on the outdoor unit. 

 Falling yourself or falling objects could cause 
 injury.

 Do not wipe the controller panel with benzene 

or other organic solvent.  

 Never operate remote controller buttons with 
 hard, pointed objects.   

  This will cause discoloration and/or peeling. 

 If the panel needs cleaning, use a damp cloth 
 with some water-diluted neutral detergent. 

  Do not operate the air conditioner when using 

a room fumigation type insecticide.

   Take care of scaffolding and exercise caution 

when working high above ground level.

   Fumigation chemicals deposited in the unit could 

Do not operate with the control panel lid open. 
If water gets inside the panel, it may result in 

   equipment failure or electric shock.  

 endanger the health of those who are hypersensitive 
 to such chemicals. 

  Do not pull or twist the remote controller cord.

This may cause malfunctioning.

Wipe with a dry cloth afterwards.

   Ensure that the remote controller is not exposed 

 to direct sunlight.
 This will cause discoloration of the LCD display with
 resulting loss of readability.

PROGRAM DRY

Summary of Contents for FBA100BVMA

















Reviews: