background image

 

12

  DUST FROM THE INDOOR UNITS

• 

Dust may blow out from the unit after 

starting operation from long resting time.
Dust absorbed by the unit blows out.

THE INDOOR UNITS GIVE OFF ODOURS

• 

During operation
The unit absorbs the smell of rooms, 
furniture, cigarettes, etc., and then emits 
them.
If odour is a concern, you can set to zero fan 

 

speed when the indoor temperature reaches 
the set temperature.
For details, contact your local dealer.

  THE AIR CONDITIONER DOES NOT COOL 

EFFECTIVELY

• 

The air conditioner is operating in the 

PROGRAM DRY OPERATION.
This is because program dry mode operates 
so that the indoor temperature decreases as 
little as possible.
Lower the indoor temperature using the 
COOLING OPERATION, and then use the 
PROGRAM DRY OPERATION.
(Refer to 

CHARACTERISTICS OF THE 

PROGRAM DRY OPERATION on page 7.)

• 

Read through characteristics of the 

COOLING OPERATION, characteristics

 

of the HEATING OPERATION, and 
characteristics of the PROGRAM DRY 
OPERATION on page 6-7.

10.

 

TROUBLESHOOTING

Please check before requesting a service.

1.  If the air conditioner does not operate at all.

• 

Check if fuse has blown. 
Turn off the power supply.

• 

Check if the power circuit breaker is blown. 
If the tab of power circuit breaker is in the OFF 
position, turn the power on with the power 
circuit breaker switch.

 

If the tab of power circuit breaker is in the trip 
position do not turn the power on with the 
power circuit breaker switch. 
Contact your local dealer.

Tab

T

r

ip position

Power circuit breaker
(Earth leakage breaker)

ON

OFF

• 

Check if there is a power failure. 
Wait until power is restored. If power failure
occurs during operation, the air conditioner
automatically restarts immediately after the 
power supply recovers.

2.  If the air conditioner stops after operating the 

air conditioner.

• 

Check if the air inlet or outlet of outdoor or 
indoor unit is blocked by obstacles.  
Remove the obstacle and make it well-
ventilated.

• 

 

 

conditioner will result and the performance of the
air conditioner will be degraded and power con- 

with dust or dirt. 
In addition, this may cause dew condensation 
at the air outlet. 
(Refer to 

8. MAINTENANCE on page 8.)

3.  The air conditioner operates but it does not 

• 

Check if the air inlet or outlet of outdoor or 
indoor unit is blocked by obstacles.  
Remove the obstacle and make it well-ventilated.

 

Obstacles decrease the fan speed, and cause 
performance decrease and breakage when 
discharged air is suctioned. 
They cause a waste of electricity, and that may 
stop the devices.

• 

 

(Refer to 

8

.

 MAINTENANCE

 

on page 8.)

• 

Check if the set temperature is not proper. 
Set to an appropriate temperature and fan 
speed.

• 

Check if the FAN SPEED button is set to LOW 
SPEED. 
Set to an appropriate temperature and fan 
speed.

• 

Check if the doors or the windows are open. 
Shut doors or windows to prevent wind from 
coming in.

sufficiently cool or heat.

Check if the air filter is clogged.
Ask a qualified service person to clean the air
filters. 
A decrease in the airflow volume of the air

sumption will increase if the air filter is clogged

Check if the air filter is clogged.
Ask a qualified service person to clean the air
filters.
A decrease in the airflow volume of the air
conditioner will result and the performance of the 
air conditioner will be degraded and power con-
sumption will increase if the air filter is clogged
with dust or dirt.
In addition, this may cause dew condensation
at the air outlet.

6. 

7. 

8. 

Summary of Contents for FBA100BVMA

















Reviews: