Daikin ETSXB16E, Installer'S Reference Manual

Page: 225 / 316

10 | Configuration
Installer reference guide
225
EPRA14~18D + ETSH/X(B)16P30+50E
Daikin Altherma 3 H HT ECH₂O
4P679467-1C – 2023.07
▪ Outdoor ambient temperature is low enough
▪ Temperature at the outdoor unit heat exchanger coil is low enough
# Code Description
[9.H] N/A Do you want to start a defrost operation?
▪ Back
▪ OK
NOTICE
Forced defrost start-up. You can only start forced defrost when the heating
operation has been running for a while.
Overview field settings
Almost all settings can be done using the menu structure. If for any reason it is
required to change a setting using the overview settings, then the overview
settings can be accessed in the field settings overview [9.I]. See
"To modify an
overview setting" [
4
144].
Export MMI settings
About exporting the configuration settings
Export the configuration settings of the unit to a USB memory stick, via the MMI
(the user interface of the indoor unit). When troubleshooting, these settings can
be provided to our Service department.
# Code Description
[9.N] N/A Your MMI settings will be exported
to the connected storage device
:
▪
Back
▪ OK
To export MMI settings
1 Open the user interface panel and insert a USB memory stick.
1
2
—
2 On the user interface, go to [9.N] Export MMI settings .
3 Select OK .
4 Remove the USB memory stick and close the user interface
panel. —