12/13
Breadcrumb Field code
Setting name
Range, step
Default value
Date
Value
Field settings table
Installer setting at variance with
default value
9.I
[C-08]
R/W
0: No
1: Outdoor
2: Room
9.I
[C-09]
R/W
0: Abnormal
1: Normal
9.I
[C-0A]
0
9.I
[C-0B]
0
9.I
[C-0C]
0
9.I
[C-0D]
0
9.I
[C-0E]
0
9.I
[D-00]
R/W
0: No
1: Only BSH
2: Only BUH
3: All
9.I
[D-01]
R/W
0: No
1: Open
2: Closed
3: Smart Grid
9.I
[D-02]
R/W
0: No DHW pump
1: Instant hot water
2: Disinfection
3: Circulation
4: Circulation and disinfection
9.I
[D-03]
R/W
0: No
1: increase 2°C, span 4°C
2: increase 4°C, span 4°C
3: increase 2°C, span 8°C
4: increase 4°C, span 8°C
9.I
[D-04]
R/W
0: No
1: Pwr consmp ctrl
9.I
[D-05]
R/W
0: No
1: Yes
9.I
[D-07]
R/W
0: No
1: Yes (DHW)
2: Yes (DHW + SH)
9.I
[D-08]
R/W
0: No
1: 0,1 pulse/kWh
2: 1 pulse/kWh
3: 10 pulse/kWh
4: 100 pulse/kWh
5: 1000 pulse/kWh
9.I
[D-09]
R/W
0: No
1: 0,1 pulse/kWh
2: 1 pulse/kWh
3: 10 pulse/kWh
4: 100 pulse/kWh
5: 1000 pulse/kWh
6: 100 pulse/kWh (PV meter)
7: 1000 pulse/kWh (PV meter)
8: 1 pulse/m³ (gas meter)
9: 10 pulses/m³ (gas meter)
10: 100 pulses/m³ (gas meter)
9.I
[D-0A]
0
9.I
[D-0B]
2
9.I
[D-0C]
0
9.I
[D-0D]
0
9.I
[D-0E]
0
9.I
[E-00]
R/O
0~5
0: LT split
9.I
[E-01]
R/O
1
9.I
[E-02]
R/W (*5)
R/O (*6)
0: Reversible (*5)
1: Heating only (*6)
9.I
[E-03]
R/O
3: 6V (*1)
4: 9W (*2)
9.I
[E-04]
R/O
0: No
1: Yes
9.I
[E-05]
R/W
0: No (*3)
1: Yes (*4)
9.I
[E-06]
1
9.I
[E-07]
R/W
0~8
0: EKHWS/E, small volume (*3)
1: Integrated (*4)
3: EKHWS/E, big volume (*3)
5: EKHWP/HYC (*3)
7: Third party tank, small coil (*3)
8: Third party tank, large coil (*3)
9.I
[E-08]
R/W
0: No
1: Yes
9.I
[E-09]
1
9.I
[E-0B]
R/W
0: Not installed
1: -
2: Bizone kit installed
9.I
[E-0C]
R/W
0: Without hydraulic separator / no
direct pump
1: With hydraulic separator / no direct
pump
2: With hydraulic separator / with direct
pump
9.I
[E-0D]
R/O
0: No
1: Yes
9.I
[E-0E]
0
9.I
[F-00]
R/W
0: Restricted
1: Allowed
Which type of external sensor is installed?
What is the required alarm output contact type?
--
Is the pump allowed to run if prefer. kWh rate PS is cut?
Is a solar kit connected?
Is an external kWh meter used for power measurement?
What is the indoor unit software type?
What is the number of backup heater steps?
Which type of compressor is installed?
Is the power saving function available on the outdoor unit?
What bizone system type is installed?
Is the system filled with glycol ?
Is an external kWh meter used for power measurement, kWh meter used for smart
grid or a gas meter for hybrid unit?
--
--
--
--
--
Which type of unit is installed?
Can the system prepare domestic hot water?
--
--
--
--
Which heaters are permitted if prefer. kWh rate PS is cut?
Contact type of preferential kWh rate PS installation?
Which type of DHW pump is installed?
Leaving water temperature compensation around 0°C.
Is a demand PCB connected?
--
Pump operation allowed outside range.
Is a bizone kit installed?
--
What kind of DHW tank is installed?
Power saving function for outdoor unit.
--
4P717809
‐
1
–
2022.11
(*1)
*6V*_(*2)
*9W*_
(*3)
ELB*_(*4)
ELV*_
(*5)
*X*_(*6)
*H*
