3
x
Product description
E E EKSH26P
DAIKIN Solar P-SYS
008.1629544_01 – 12/2016
Planning and installation instructions
7
3.2
Brief description
The DAIKIN solar system is a thermal solar system for supplying
hot water for consumption and solar support.
Operating mode
The Solar EKSV21P, EKSV26P and EKSH26P high-perfor-
mance, flat solar panels convert solar radiation into heat with a
high degree of efficiency. The heat carrying medium is a
glycol/water mix.
As soon as the solar panels have reached a usable temperature
level, the glycol/water in the solar circuit is pumped through the
solar panels. Otherwise, the circulation pump switches off and
the mix remains in the solar system circuit. This operating mode
has several advantages:
– Minimum maintenance requirements.
– Frostproof.
– Complete flexibility in arrangement and installation
– High efficiency due to integrated solar heat exchanger
Modular design
The system consists of several pre-assembled modules. Plug-in
technology and a high degree of pre-assembly ensure fast and
simple system installation.
Storage tank
The following storage tanks can be used for the DAIKIN solar
system:
– DAIKIN EKHWP
1)
: Highly thermally insulated, unpressurised
solar stratified tank (with possibility of connecting to a DAIKIN
air/water heating pump).
– Daikin Altherma integrated solar unit
2)
: Solar stratified tank
with integrated indoor unit of an air/water heating pump.
Electronic control
The DSR1 fully electronic pressurised solar control unit ensures
optimum utilisation of the solar heat (hot water heating, heating
support) and the observance of all safety-relevant aspects. The
parameters required for ease of operation are preset at the
factory for selectable hydraulic variants (see accompanying in-
stallation and operating instructions).
3.3
System components for pressurised solar
systems
3.3.1 System components for all systems
High-performance flat solar panels
EKSV21P
H x W x D: 2000 x 1006 x 85 mm, weight: approx. 35 kg
EKSV26P
H x W x D: 2000 x 1300 x 85 mm, weight: approx. 42 kg
EKSH26P
H x W x D: 1300 x 2000 x 85 mm, weight: approx. 42 kg
FIX MP solar panel mounting rails
FIX MP100
for one EKSV21P flat solar panel
FIX MP130
for one EKSV26P flat solar panel
FIX MP200
for one EKSH26P flat solar panel
The pressurised solar system must only be used with
the DSR1 control unit and the EKSRDS2A pressure
station.
1)
The device variants suitable for the pressurised solar system are identified by
the extension "P" added to the type designation.
2)
The device variants suitable for the pressurised solar system are identified by
the extension "B" added to the type designation.
Design, functionality, start-up and operation of the stor-
age tanks and other Solar components not mentioned in
chap. 3.3 are not described in these instructions.
Detailed information on these components can be found
in the associated operating and installation instructions.
The handling instructions and descriptions mentioned in these
instructions basically apply to all DAIKIN storage tanks that can
be used in this solar system, even if only one type is described
for illustrative purposes. If there are variances to other storage
tanks, special reference is made.
1a
High-performance EKSV21P / EKSV26P flat solar panel
1b
High-performance EKSH26P flat solar panel
Fig. 3-2
Flat solar panel
2a
Mounting profile rail
2b
Solar panel securing clips
Fig. 3-3
FIX MP
B
B
T
1a
V21P
V26P
H26P
H
H
1b
2a (2x)
2b (2x)
