background image

x

 Start-up and taking out of operation

E E EKSH26P
DAIKIN Solar P-SYS
008.1629544_01 – 12/2016

Planning and installation instructions

25

Drain the DAIKIN solar system (collect the solar system fluid 
and dispose of it properly) and dismantle in reverse order 
according to the installation manual (chapter 4 "Installation").

Properly dispose of the DAIKIN solar system.

Recommendations for disposal

Thanks to the environmentally friendly design of the 
solar system, DAIKIN has complied with requirements 
for environmentally sound disposal. During the disposal 
process, the only waste created is that which can be 

used for material or thermal recycling.
The materials used that are suitable for recycling can be sorted 
into individual types.

The designation of the product means that electrical 
and electronic products may not be disposed of to-
gether with unsorted domestic waste.

Proper disposal in compliance with the respective na-
tional regulations of the country of use is the responsi-
bility of the user/owner.

Disassembly of the system, handling of coolant, oil and 
other parts may only be carried out by a qualified fitter.

Disposal may only be carried out by a facility that 
specialises in reuse, recycling and recovery.

Further information is available from the installation company 
or the responsible local authorities.

Summary of Contents for EKSV21P

































Reviews: