manualshive.com logo in svg

Daikin EHVZ04S18EA6V, Installer'S Reference Manual

The Daikin EHVZ04S18EA6V offers exceptional performance in climate control. To ensure hassle-free installation, download the Installer's Reference Manual for free from manualshive.com. This comprehensive manual provides easy-to-follow instructions, allowing you to optimize your comfort with this remarkable product.

Share
Download
background image

14

 | 

Troubleshooting

Installer reference guide

230

ERGA04~08EA + 08S18+23EA

Daikin Altherma 3 R F

4P629093-1A – 2021.11

14 Troubleshooting

INFORMATION

This  unit  is  a  heating  only  model.  Therefore,  all  references  to  cooling  in  this
document are NOT applicable.

In this chapter

14.1

Overview: Troubleshooting .................................................................................................................................................... 230

14.2

Precautions when troubleshooting........................................................................................................................................ 230

14.3

Solving problems based on symptoms................................................................................................................................... 231
14.3.1

Symptom: The unit is NOT heating or cooling as expected .................................................................................. 231

14.3.2

Symptom: Hot water does NOT reach the desired temperature ......................................................................... 232

14.3.3

Symptom: The compressor does NOT start (space heating or domestic water heating) .................................... 232

14.3.4

Symptom: The system is making gurgling noises after commissioning................................................................ 232

14.3.5

Symptom: The pump is making noise (cavitation) ................................................................................................ 233

14.3.6

Symptom: The pressure relief valve opens ........................................................................................................... 233

14.3.7

Symptom: The water pressure relief valve leaks................................................................................................... 234

14.3.8

Symptom: The space is NOT sufficiently heated at low outdoor temperatures .................................................. 234

14.3.9

Symptom: The pressure at the tapping point is temporarily unusually high ....................................................... 235

14.3.10

Symptom: Decoration panels are pushed away due to a swollen tank................................................................ 235

14.3.11

Symptom: Tank disinfection function is NOT completed correctly (AH-error) .................................................... 235

14.4

Solving problems based on error codes................................................................................................................................. 236
14.4.1

To display the help text in case of a malfunction.................................................................................................. 236

14.4.2

Error codes: Overview............................................................................................................................................ 237

14.1 Overview: Troubleshooting

This chapter describes what you have to do in case of problems.

It contains information about:

▪

Solving problems based on symptoms

▪

Solving problems based on error codes

Before troubleshooting

Carry out a thorough visual inspection of the unit and look for obvious defects such
as loose connections or defective wiring.

14.2 Precautions when troubleshooting

WARNING

▪

When  carrying  out  an  inspection  on  the  switch  box  of  the  unit,  ALWAYS  make
sure that the unit is disconnected from the mains. Turn off the respective circuit
breaker.

▪

When  a  safety  device  was  activated,  stop  the  unit  and  find  out  why  the  safety
device  was  activated  before  resetting  it.  NEVER  shunt  safety  devices  or  change
their values to a value other than the factory default setting. If you are unable to
find the cause of the problem, call your dealer.

DANGER: RISK OF ELECTROCUTION

Summary of Contents for EHVZ04S18EA6V

















































































































































































































































































Reviews:

No comments

Related manuals for EHVZ04S18EA6V

Jacuzzi Magnum Owner'S Manual preview
Magnum
Brand: Jacuzzi Pages: 8
Zoeller 64 HD Series Repair Manual preview
64 HD Series
Brand: Zoeller Pages: 8
Danfoss Optyma Blue OP-LGHE068NTA07D Instructions Manual preview
Optyma Blue OP-LGHE068NTA07D
Brand: Danfoss Pages: 8
WilTec CTF-2800 Operating Instructions Manual preview
CTF-2800
Brand: WilTec Pages: 8
EBARA EVMSN3 Operating And Maintenance Manual preview
EVMSN3
Brand: EBARA Pages: 172
Carrier WEATHERMAKER 50TFQ008 Installation, Start-Up And Service Instructions Manual preview
WEATHERMAKER 50TFQ008
Brand: Carrier Pages: 28
Zibro SRE 168E Owner'S Manual preview
SRE 168E
Brand: Zibro Pages: 75
Panduit CT-902HP Operation And Maintenance preview
CT-902HP
Brand: Panduit Pages: 7
Texas Equipment TGP 20 User Manual preview
TGP 20
Brand: Texas Equipment Pages: 11
Jandy JRT Series Installation And Operation Manual preview
JRT Series
Brand: Jandy Pages: 96
Giant LP122A Series Operating Instructions/ Repair And Service Manual preview
LP122A Series
Brand: Giant Pages: 12
Contimac 430501060 Owner'S Manual preview
430501060
Brand: Contimac Pages: 31
EINHELL HWW 4600 NIRO-NIRO Operating Instructions Manual preview
HWW 4600 NIRO-NIRO
Brand: EINHELL Pages: 40
Tuxhorn tubra- PGS multi Assembly And Operating Manual preview
tubra- PGS multi
Brand: Tuxhorn Pages: 60
CLIVET WSAN-XIN 21 Installation, Use And Maintenance Manual preview
WSAN-XIN 21
Brand: CLIVET Pages: 56
EBARA BEST ONE Operating And Maintenance Manual preview
BEST ONE
Brand: EBARA Pages: 40
Living & Co PTC-1819M User Manual preview
PTC-1819M
Brand: Living & Co Pages: 8
RZTec ZZK Operating And Assembly Instructions Manual preview
ZZK
Brand: RZTec Pages: 8

Brands by name

Popular brands

Load more brands