D-EOMOAH00903-21_01EN - 36 / 37
-
The unit should not be mounted in recesses, shelving, behind curtains or doors or above or near direct heat sources.
-
Avoid direct sun and draught.
-
The conduit must be sealed on the device side, as currents of air in the conduit can affect the sensor reading.
-
The admissible ambient conditions must be observed.
-
Local installation regulations must be observed.
-
After an interruption of the connection to the 2-wire interface, parameter initialization will restart.
NOTE! The equipment is not protected against accidental connection to AC 230 V.
