Remote Controller (Wireless Type)
OH12-01
176
Control Systems
3P107423-1B
5
English
(3) Receiver installation
1.
As shown at right, pass the harness from the receiver through the
wiring hole of the decoration panel. Then, attach the receiver to
the decoration panel.
2.
Hook the harness from the receiver on the upper part of the
panel temporary suspension of the decoration panel.
Be sure to push the harness to the groove.
3.
Attach the decoration panel to the indoor unit.
(Refer to the installation manual attached to the decoration panel.)
4.
Connect the harness from the receiver to the connector X1A on the transmitter board.
After connecting, use the attached clamp to fix the two harnesses to the transmitter board box.
Panel temporary suspension
X2A
X1A
Clamp
X2A
X1A
