Remote Controller (Wireless Type)
OH12-01
172
Control Systems
1.8.4
Installation Manual
3P107423-1B
1
English
BRC7E530W
BRC7E531W
BRC7EA530W
BRC7EA531W
Wireless Remote Controller Kit
Installation manual
CONTENTS
1. SAFETY CONSIDERATIONS ........................................................................................1
2. BEFORE INSTALLATION ..............................................................................................2
3. REMOTE CONTROLLER INSTALLATION ....................................................................2
4. RECEIVER INSTALLATION...........................................................................................3
5. FIELD SETTING.............................................................................................................6
6. TEST OPERATION ........................................................................................................8
1. SAFETY CONSIDERATIONS
Please read this “SAFETY CONSIDERATIONS” carefully before installing air conditioning equipment and be
sure to install it correctly. After completing the installation, make sure at start up operation that the unit oper-
ates properly. Please instruct the customer how to operate the unit and keep maintenance.
Meaning of caution symbols
CAUTION
.............. If the caution is not observed, it may cause injury or damage to equipment.
NOTE
............. These instructions will ensure proper use of the equipment.
CAUTION
•
Refer also to the installation manual attached to the indoor unit and the installation manual attached to the
decoration panel.
•
Confirm that following conditions are satisfied prior to installation.
•
Ensure that nothing interrupts the operation of the wireless remote controller. (Ensure that there is nei-
ther a source of light nor fluorescent lamp near the receiver. Also, ensure that the receiver is not
exposed of direct sunlight.)
•
Ensure that the operation display lamp and other indicators are easy to see.
•
The installation position of this kit is 1 position of the decoration panel. Therefore, confirm that its position
is set so that the single form the wireless remote controller can be easily transmitted and its display can be
easily seen.
