BRBRC3E52C7
Wired remote controller
4P368040-1 – 2014.02
Quick reference
2
4
SETBACK
The setback function will maintain the room temperature in a
specific range when the remote controller is turned OFF.
5
PROHIBIT BUTTONS/FUNCTION/MODE
The buttons, functions and/or operation modes can be locked to
limit the user action.
6
DETAILED DISPLAY POSSIBILITY
Additionally display the outdoor temperature or room
temperature.
7
INTERLOCK WITH TWO EXTERNAL SIGNALS
(Only available when the BRP7A51 Digital Input Adapter is
connected)
When a BRP7A51 Digital Input Adapter is connected, the
schedule function will be disabled as long as the BRP7A51
Digital Input Adapter is connected.
Connect up to two switch contacts (contact B1 and B2).
Typical application: hotel interlock with field supplied window
contact B1 and key card B2.
Possible to enable/disable the window contact B1 and key
card B2 independently.
Delay and reset functionality for key card B2.
3. Name and function of switches
1
OPERATION MODE SELECTOR BUTTON
Only available on the BRC2E.
Press this button to select the operation mode of your
preference.
2
FAN SPEED BUTTON
Used to change the fan speed.
3
MENU/ENTER BUTTON
This button is disabled by default (refer to
"8. Enable/Disable
the Menu/Enter and Cancel Button" on page 9
).
Used to display the main menu or enter the selected item.
4
UP/DOWN BUTTON
Used to raise/lower the set temperature.
Used to highlight the next item on the upper/lower side.
Used to change the selected item.
5
RIGHT/LEFT BUTTON
Used to highlight the next item on the right/left-hand side.
The display contents are changed to the next/previous
screen.
6
ON/OFF BUTTON
Press to start or stop the air conditioner.
7
OPERATION LAMP
Lights up during operation.
This lamp is not lit when the unit operation is OFF.
Blinks if an error occurs.
8
CANCEL BUTTON
Used to return to the previous screen.
This button is disabled by default (refer to
"8. Enable/Disable
the Menu/Enter and Cancel Button" on page 9
).
9
LCD (with backlight)
The backlight will be lit for approximately 30 seconds when
one of the buttons is pressed.
The actions linked to the buttons, except for the ON/OFF
button, are not carried out when the backlight is not lit.
When 2 remote controllers are used to control a single indoor
unit, the backlight of the remote controller which is operated
first will be lit.
4. Name and function of icons
To change between the standard display and the detailed display
refer to
"16. Configuration" on page 6
,
"To select the display mode"
.
Standard display
Detailed display
1
OPERATION MODE
Indicates the current operation mode.
2
FAN SPEED
Indicates the fan speed that is set for the air conditioner.
The fan speed will not be displayed if the air conditioner does
not have the fan speed control function.
3
SET/SETBACK TEMPERATURE DISPLAY
When the unit is turned ON, the temperature that is set for
the air conditioner is displayed.
When the unit is turned OFF and setback is disabled, the
temperature that is set for the air conditioner is displayed.
When the unit is turned OFF and setback is enabled, the
temperature that is set for the setback function is displayed.
By default, the display method is
Single Setpoint
mode. To
enable
Dual Setpoint
mode, refer to the Installation Manual.
4
DEFROST/HOT START
(HRV only)
Indicates that the Defrost/Hot Start operation is active.
INFORMATION
This is the only button that works when the backlight is
not lit.
1
9
4
5
3
2
8
6
7
Operation mode
Cool
Heat
Vent
Air Clean
Fan
Dry
Auto (Cool)
Auto (Heat)
2
1
10
3
4
11
12
9
8
7
6
5
28
°C
14
13
F r i
11:03
3
15
