ED72-975
Operation Manual
BRC1E61
17
6.3
Basic Operation Method (Use of Direct Buttons)
3P243520-1
English
15
2
Press On/Of
f button.
Ɣ
The Operation lamp (green) will be lit
and the system will start operating.
3
Set temperature
28
°C
Cool
Return Setting
The set temperature will increase by
Ɣ
1°C when
button is pressed and
decrease by 1°C when
button is
pressed.
No temperature settings are possible while in fan mode.
*
4
Set temperature
28
°C
Cool
Return Setting
Low
Middle
High
T
o
make fan speed control, press Fan
Ɣ
speed control button and select the
desired fan speed from Low
, Middle or
High.
T
wo fan speed adjustment levels Low
, High may be available
*
depending on the type of indoor unit.
The system may be in automatic fan speed control for
*
mechanical protection purposes.
The system may be in automatic fan speed control according to
*
the room temperature.
The fan may stop operating, which, however
, is not a failure.
The completion of fan speed selection may take time, which,
*
however
, is not a failure.
5
Make airfl
ow direction settings from the main menu
Ɣ
(see page 28)
.
The airfl
ow direction of the system cannot be changed unless
*
the system is provided with a function to allow airfl
ow direction
changes.
01_EN_3P243520-1.indd 15
2/6/2009 5:49:59 PM
14
English
Cool/Heat/Auto/Fan Operation
(SkyAir and VR
V)
Operation Method
1
Ɣ
Displays the main menu screen.
(See page 26.)
Ɣ
Press buttons to select
T
imer setting
on the main menu
screen.
Press Menu/Enter button to display
the timer settings screen.
*
Items presently enabled or disabled are
displayed.
Return
Setting
MainMenu
Set temp mode changeover
Airflow Direction
Quick Cool/Heat On/Of
f
V
e
ntilation
T
imer setting
Service Contact/Model info
1/2
Return
Setting
T
imer setting
Schedule timer
Of
f reminder timer
Disable
Disable
2/2
Operation screen
display
Describes screens that
will be displayed on the
remote controller in
operation.
Operation procedure
Explains a button operation
procedure for the remote controller
.
Operate the buttons according to
the procedure.
Operation button
display
Displays the positions of
buttons to be operated.
Remote Controller Functions
Preparation
For mechanical protection purposes, turn ON the system at least six hours before starting the
Ɣ
operation of the system.
Do not turn OFF the system in season in order to ensure the smooth starting of the system.
Ɣ
Operation Method
1
Set temperature
28
°C
Cool
Return Setting
Press Operation Mode Selector button
Ɣ
several times until the desired mode
Cooling, Heating, Fan, or
Auto mode is
selected.
Unavailable operation modes are not displayed.
*
Only the Cooling or Fan mode can be selected if the air
*
conditioner is a cooling-only model.
The
Auto mode can be set in the case of the VR
V cooling/
*
heating simultaneous operation system.
Changeover under control will appear on each remote controller
,
*
but only the Cooling or Fan mode can be set in the case of the
VR
V cooling-only system.
Note
Before making a mode change, make sure that Changeover
Ɣ
under control is not displayed on the remote controller
.
The cooling or heating mode cannot be selected if the above is
displayed on the remote controller
. See page 21 if Changeover
under control display blinks.
Basic Operation Method
(Use of Direct Buttons)
01_EN_3P243520-1.indd 14
2/6/2009 5:49:58 PM
