background image

 

9

NOTE

The filter auto clean function takes around 5-10 minutes. Depending
on casing size. In case of a high dust environment the cleaning cycle
takes 10~20 minutes.
Execution of the cleaning function, always during the scheduled time
slot of 3 hours, will start as soon as possible considering the following
conditions:

- during the first hour the cleaning function will only be 

performed if the unit is not operating;

- during the second and third hour same condition as during 

first hour or when the unit is in thermostat OFF.

The unit will try to perform the cleaning function during the next
scheduled time slot of 3 hours in case it was not executed.
If the unit, in case of VRV, could not perform the cleaning function
after elapse of 2 consecutive scheduled time slots of 3 hours, error
code AH09 displays on the remote controller (see "NOTE" on page
8). The error code remains displayed as long as the function is not
completed, but the unit can operate normally at all times. 
Sky air units do not display that error code.

Filter auto cleaning

The product has the following three operation modes, any one of
which can be set for filter auto cleaning. 

Preparation

To designate a period for filter auto cleaning, avoid selecting the
periods of time when the product is in air conditioning operation
as much as possible.
If the period for filter auto cleaning overlaps with that for the air
conditioning operation of the product, the product may stop air
conditioning forcibly and start filter auto cleaning.

If the message 

"Set clock from menu"

 appears, make clock

settings again so that the filter auto cleaning will be performed
during the designated period.

C

LOCK

&C

ALENDAR

Setting the clock

Operation method

Operation 

mode

Description

Clock 

setting

Availability for 

designating 

time to start 

filter auto 

cleaning

Scheduled 

timer operation

Performs filter auto cleaning 

during the designated period 

selected from 8 periods.

12:00 to 15:00 

operation

Performs filter auto cleaning 
during the factory-set period 

of time (12:00 to 15:00).

Auto control 

operation

Performs filter auto cleaning 

according to the control 

reference.

or

NOTE

The product will be set to auto control operation
mode unless clock settings are made again if the
clock is reset for some reason (e.g., no power is
supplied to the product for 48 hours or longer).

The product may generate a little noise while the
dust is scraped with the brush.

1

Basic screen

Press Menu/Enter button.

2

Main menu screen

The main menu screen will appear.

3

Press 

 

to select 

Clock & Calendar

 on the main

menu screen.
Press Menu/Enter button to display the clock setting
screen.

4

Select "Year" with 

 

buttons.

Input the year with 

 

buttons.

Holding down the button causes the number to
change continuously.

5

Select "Month" with 

 buttons.

Input the day with 

 

buttons.

Holding down the button causes the number to
change continuously.

Cool

Set to

Cool

28

°C

Return

Setting

Main Menu

Quick Start

Ventilation
Energy Saving Options
Schedule
Filter Auto  Clean
Maintenance Information

1/2

Return

Setting

Main Menu

Configuration
Current Settings

Clock & Calendar

Language 

2/2

Date & Time

Year 

2011

Month 01
Day 01
Thursday

 12:00

Return

Setting

Date & Time

Year 2011
Month 

10

Day 01
Thursday

 12:00

Return

Setting

4PEN470901-1B.book  Page 9  Thursday, September 7, 2017  3:17 PM

Summary of Contents for BAE20A102

















Reviews: