I
nTroduCTIon
www.DaikinApplied.com
3
IM 1040 • VAV ACTUATOR
I
nTroduCTIon
Revision History
Manual
Date
History
IM 1040
3/5/2010
Initial release
Reference Documents
Number
Company
Title
Source
OM 1063 Daikin Applied
VAV Actuator
Owners
Manual
www.
DaikinApplied.
com
Limited Warranty
Consult your local Daikin representative for warranty
details. To find your local Daikin representative, go to
www.DaikinApplied.com.
Notice
Copyright © 2010 Daikin Applied, Minneapolis MN. All rights
reserved throughout the world.
Daikin Applied reserves the right to change any information
contained herein without prior notice. The user is responsible
for determining whether this software is appropriate for his or
her application.
® ™ The following are tradenames or registered trademarks of
their respective companies: BACnet from the American Society
of Heating, Refrigerating and Air-Conditioning Engineers, Inc.;
Windows from Microsoft Corporation; Daikin and MicroTech III
from Daikin Applied.
General Information
This manual contains the information you need to setup the
electronic outputs and calibrations for the BACnetVAV Actuator
on a VAV box.
Hazard Identification Messages
DANGER
Dangers indicate a hazardous situation which will result in
death or serious injury if not avoided.
WARNING
Warnings indicate potentially hazardous situations, which can
result in property damage, severe personal injury, or death if
not avoided.
CAUTION
Cautions indicate potentially hazardous situations, which can
result in personal injury or equipment damage if not avoided.
NOTICE
Notices give important information concerning a process,
procedure, special handling or equipment attributes.
DANGER
Electric shock hazard . Can cause personal injury or
equipment damage.
This equipment must be properly grounded. Connections and
service to the MicroTech
®
III Chiller Unit Controller must be
performed only by personnel knowledgeable in the operation
of the equipment being controlled.
WARNING
Static sensitive components . Can cause equipment
damage.
Discharge any static electrical charge by touching the bare
metal inside the control panel before performing any service
work. Never unplug cables, circuit board terminal blocks, or
power plugs while power is applied to the panel.
NOTICE
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with this instruction manual, may cause interference to radio
communications. It has been tested and found to comply with
the limits for a Class A digital device, pursuant to part 15 of the
FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment
is operated in a commercial environment. Operation of this
equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct
the interference at his or her own expense. Daikin Applied
disclaims any liability resulting from any interference or for the
correction thereof.
Summary of Contents for BACnet
Page 9: ......
