11
|
Configuration
Installer reference guide
230
ERRA08~12E + EL23E
Daikin Altherma 3 R MT F
4P708478-1 – 2023.05
#
Code
Description
[9.G]
N/A
Disable protections
:
▪
0:
No
▪
1:
Yes
Forced defrost
Forced defrost
Manually start a defrost operation. The forced defrost will only start when at least
the following conditions are fulfilled:
▪
Unit is in heating operation and has been running for a few minutes
▪
Outdoor ambient temperature is low enough
▪
Temperature at the outdoor unit heat exchanger coil is low enough
#
Code
Description
[9.H]
N/A
Do you want to start a defrost operation?
▪
Back
▪
OK
NOTICE
Forced defrost start-up.
You can only start forced defrost when the heating
operation has been running for a while.
Overview field settings
Almost all settings can be done using the menu structure. If for any reason it is
required to change a setting using the overview settings, then the overview
settings can be accessed in the field settings overview [9.I]. See
Export MMI settings
About exporting the configuration settings
Export the configuration settings of the unit to a USB memory stick, via the MMI
(the user interface of the indoor unit). When troubleshooting, these settings can
be provided to our Service department.
#
Code
Description
[9.N]
N/A
Your MMI settings will be exported
to the connected storage device
:
▪
Back
▪
OK
