9 Disposal
Operation manual
20
EHBH/X04+08EA/EF + EHVH/X04+08S(U)18+23EA/EJ
Daikin Altherma 3 R F+W
4P642728-1A – 2021.02
WARNING
Air purging heat emitters or collectors.
Before you
purge air from heat emitters or collectors, check if
or
is displayed on the home screen of the user interface.
▪ If not, you can purge air immediately.
▪ If yes, make sure that the room where you want to
purge air is sufficiently ventilated.
Reason:
Refrigerant
might leak into the water circuit, and subsequently into
the room when you purge air from the heat emitters or
collectors.
9
Disposal
NOTICE
Do NOT try to dismantle the system yourself: dismantling
of the system, treatment of the refrigerant, oil and other
parts MUST comply with applicable legislation. Units
MUST be treated at a specialised treatment facility for
reuse, recycling and recovery.
10
Glossary
DHW = Domestic hot water
Hot water used, in any type of building, for domestic
purposes.
LWT = Leaving water temperature
Water temperature at the water outlet of the unit.
11
Installer settings: Tables to be
filled in by installer
11.1
Configuration wizard
Setting
Fill in…
System
Indoor unit type
(read only)
Backup heater type
[9.3.1]
(read only)
Domestic hot water
[9.2.1]
Emergency
[9.5]
Number of zones
[4.4]
Booster heater capacity
[9.4.1] (if applicable)
Backup heater
Voltage
[9.3.2]
Configuration
[9.3.3]
Capacity step 1
[9.3.4]
Additional capacity step 2
[9.3.5] (if applicable)
Main zone
Emitter type
[2.7]
Control
[2.9]
Setpoint mode
[2.4]
Schedule
[2.1]
WD curve type
[2.E]
Additional zone
(only if [4.4]=1, dual zone)
Setting
Fill in…
Emitter type
[3.7]
Control
(read only) [3.9]
Setpoint mode
[3.4]
Schedule
[3.1]
WD curve type
[3.C] (read only)
Tank
(if applicable)
Heat up mode
[5.6]
Comfort setpoint
[5.2]
Eco setpoint
[5.3]
Reheat setpoint
[5.4]
Setpoint mode
[5.B]
WD curve type
[5.E] (read only)
11.2
Settings menu
Setting
Fill in…
Main zone
Thermostat type
[2.A]
Additional zone
(if applicable)
Thermostat type
[3.A]
Information
Dealer information
[8.3]