background image

3 About the system

Operation manual

4

EBSH/X(B)11+16P30+50DF

Daikin Altherma 3 R ECH

O

4P663485-1 – 2021.07

2.2

Instructions for safe operation

WARNING: MILDLY FLAMMABLE
MATERIAL

The refrigerant inside this unit is mildly
flammable.

WARNING

The appliance shall be stored so as to
prevent mechanical damage and in a
well-ventilated room without
continuously operating ignition sources
(example: open flames, an operating
gas appliance or an operating electric
heater).

WARNING

▪ Do NOT pierce or burn refrigerant

cycle parts.

▪ Do NOT use cleaning materials or

means to accelerate the defrosting
process other than those
recommended by the manufacturer.

▪ Be aware that the refrigerant inside

the system is odourless.

WARNING

The refrigerant inside the unit is mildly
flammable, but normally does NOT
leak. If the refrigerant leaks in the room
and comes in contact with fire from a
burner, a heater, or a cooker, this may
result in fire, or the formation of a
harmful gas.

Turn off any combustible heating
devices, ventilate the room, and
contact the dealer where you
purchased the unit.

Do NOT use the unit until a service
person confirms that the part from
which the refrigerant leaked has been
repaired.

WARNING

Air purging heat emitters or
collectors.

 Before you purge air from

heat emitters or collectors, check if 
or 

 is displayed on the home screen

of the user interface.

▪ If not, you can purge air immediately.

▪ If yes, make sure that the room

where you want to purge air is
sufficiently ventilated. 

Reason:

Refrigerant might leak into the water
circuit, and subsequently into the
room when you purge air from the
heat emitters or collectors.

3

About the system

Depending on the system layout, the system can:

▪ Heat up a space

▪ Cool  down  a  space  (if  a  heating/cooling  heat  pump  model  is

installed)

▪ Produce domestic hot water

INFORMATION

Cooling is only applicable in case of reversible models.

INFORMATION

If  underfloor  heating  is  installed  in  the  main  zone,  then  in
cooling mode the main zone can only provide refreshment.
Real cooling is then NOT allowed.

3.1

Components in a typical system
layout

g

A

d

b

a

f

e

c

B

C

A

Main zone. 

Example: 

Living room.

B

Additional zone. 

Example: 

Bedroom.

C

Technical room. 

Example: 

Garage.

a

Outdoor unit heat pump

b

Indoor unit heat pump

c

Energy storage tank

d

User interface of the indoor unit

e

Dedicated Human Comfort Interface (BRC1HHDA used as
room thermostat)

f

Underfloor heating

g

Radiators, heat pump convectors, or fan coil units

4

Quick guide

4.1

User permission level

The  amount  of  information  you  can  read  out  and  edit  in  the  menu
structure depends on your user permission level:

User

: Standard mode

Advanced user

: You can read out and edit more information

Summary of Contents for Altherma 3 R ECH2O

























Reviews: