T
RANSPORTATION
P
ROCEDURE
T
RANSPORTATION
AND
I
NSTALLATION
C
HAPTER
3
3-6
3.3.1
Transportation with lifting lug
This section explains the procedure for transportation with lifting lug such as a crane.
1.
Attach the lifting lug with the eye bolts.
2.
Lift the welding power source carefully paying attention to the balance by using lifting lug.
For preventing falling of the welding power source and resulting accidents, be sure to
observe the following:
• For operation of a crane or hoisting, make sure that a qualified personnel operate them
with attention to the surrounding area for safety.
• Use the lifting tool such as wire and shackle suitable for the weight of the welding power
source. Hoist according to the specified procedure.
• Lift the welding power source alone with two wires using all of the eye bolts.
• Do not hoist with tools and other devices placed on the welding power source.
• Make sure beforehand that the eye bolts on the surface of welding power source are
not loose. Tighten the eye bolts when they are loose.
