6-49
Chapter 6
W
elding Condition
S
ETTING
I
NTERNAL
F
UNCTIONS
W
ELDING
C
ONDITION
C
HAPTER
6
6.7.2.47 F67: Setting change of current value (initial condition, crater condition)
When “CRATER ON” is selected, the current value of the initial condition and the crater condition can
be set in percentage based on the current value of the welding condition.
•
[ON]: enables the function.
The current value of the initial condition and the crater condition becomes settable in percentage based
on the current value of crater condition.
•
[OFF]: disables the function.
6.7.2.48 F68: Setting of current value (initial condition)
The current value of the initial condition can be set in percentage based on the current value of the
welding condition.
•
Setting range of current value (initial condition): 10 % to 300
％
6.7.2.49 F69: Setting of current value (crater condition)
The current value of the crater condition can be set in percentage based on the current value of welding
condition.
•
Setting range of current value (crater condition): 10 % to 300 %
