DAIHAN-Sci.com or
ALL
for
LAB.com
Shopping Mall
DAIHAN Scientific, Steam Sterilizers Digital Fuzzy-controlled Autoclaves .
21/53
-
After setting the compensation value, the indication of the current temperature is displayed
as the temperature including the compensation value.
-
When entering into the compensation value setting mode during the Heating operation, the
Heating operation that is operating is stopped. After setting the compensation value, the
Heating operation is re-conducted in the Set Heating Mode.
-
If the PUSH button of Jog Dial Knob is pressed and held for 2-3 seconds, the setting value
is saved and this saved value is maintained even when the power is turned on again.
-
If pressing MAIN button, it is switched to the Set Temperature Mode.
③
MAIN - Safety Locking
-
If pressing the MAIN button in the Set Temperature mode, it is switched to the Safety
Locking Mode.
-
In the Locking Mode, the Turning by the Jog-Dial Knob or Push button do not applied, and
LCD Display and LED lamp indicate the status that is currently operating.
-
If pressing once the MAIN button, it is entered into the Set Operation Time Mode.
* SUB - Set Operation Cycle
-
If pressing the SUB button in the Safety Locking mode, it is switched to the Set Operation
Cycle Mode.
-
The operation mode can be selected among the SOLID cycle mode that operates for the
sterilization of solids or dried samples, and the LIQUID cycle mode that performs the
sterilization operation of solutions.
< Fig 3.3.5. Safety Locking >
Temp PV : 27
℃
Time PV : 00:00
Operation Mode
SOLID Cycle
Operation Mode
LIQUID Cycle
< Fig 3.3.6. SOLID Cycle Mode >
< Fig 3.3.7. LIQUID Cycle Mode >
Present Temp
Remain Time
