DAIHAN-Sci.com or
ALL
for
LAB.com
Shopping Mall
DAIHAN Scientific, Steam Sterilizers Digital Fuzzy-controlled Autoclaves .
18/53
3. Product Usage
3.3 Usage Instructions
-
The SAFETY Knob is set for the user’s safety to the appropriate value at the time of the
factory shipment, so please do not change the Knob.
-
When turning ON the power of this product, please turn ON the Main Power Switch,
after necessarily turning ON the Leakage Breaker located at the bottom of the rear
panel of this product.
-
When the power is turned on, press the "OPEN" Button, and open the Door by pulling
the Lever.
-
Check the level of distilled water in the pressure vessel, and please regulate to the level
that Heater Cover can be sunk.
* Operation method for Jog-Dial
-
Jog-Dial can be manipulated for the setting in each mode by Turning and Push motion.
-
If turning the Jog-Dial knob to clockwise or counter-clockwise, the setting values can be
adjusted, and if briefly pressing once the PUSH button, the Start or the Stop operation is
performed.
-
The Turning of the Jog-Dial knob does not manipulated during operating, and if resetting
the set value, it can be adjusted by the Jog-Dial knob after stopping the product by
pressing briefly once the PUSH button.
-
If pressing for 2 or 3 seconds the PUSH button, the set value is saved, and even if the
power is turned on again, that value is maintained. (If “0” value is saved, the setting
value is initialized.)
①
MAIN - Set Operation Time
-
When the power is turned ON, the initial screen is the setting mode of the Timer set mode.
-
TIMER LED is lighted during the operation of timer, and indicates that it is operating.
-
The range of setting time is from 00:00 to 99hr and 59min (it is possible to adjust at 1min.)
and 00:00 indicates continuous operation..
< Fig 3.3.1. Set Operation Time Mode >
Time SV : 00:00
Time PV : 00:00
Set Time
Remain Time
Timer LED (Green)
