Daihan Scientific Ba Series, User Manual

Page: 15 / 43

DAIHAN-Sci.com or ALL for LAB.com Shopping Mall
15/20
This key works in the same way as in General Weighing mode.
The position of the current weight is displayed with a graph in the same way as in General
Weighing mode.
(5) Setting a reference value of counting
It is possible to select one of 10, 20, 30, 40, 50, 60, 70, 80, 90, and 100 as a reference quantity.
When ENTER key is pushed,
‘REF.Set’ message flickers and
Setting mode appears.
Of Ld 10 -d 100, the latest set number
appears.
Push this key repeatedly until a proper
quantity appears.
Put the part or weight equal to the displayed
quantity on the platter and push ENTER key.
‘do.InG’ message appears first and then
‘SET OK’ message appears. The setting process
finishes and the scale automatically goes to
Counting mode.
At this time, the current quantity is displayed,
And counting process can be performed.
When ZERO key is pushed while setting,
the setting process is cancelled.
EXIT message appears and the scale returns to
Counting mode.
(6) Comparison weighing
Comparison weighing is used when a user sets a target value and compares the target value with a sample
weight.
A difference between a target value and the current weight value is shown on the Display part.
If the current weight value is lower than a target value, a negative value appears; if equal, ‘0’ appears; if
higher, a positive value appears.