Daihan Scientific Ba Series, User Manual

Page: 16 / 43

DAIHAN-Sci.com or ALL for LAB.com Shopping Mall
16/20
Push this key repeatedly until CHK is displayed.
Whenever this key is pushed in the same way as in General Weighing mode, precision is
changed. At double precision, an additional digit appears.
If the current value is lower than a target value, the bar graph moves in between LOW and
OK; if higher, it moves in between OK and HI.
** When a weight is checked, ZERO and TARE keys do not work.
(7) Setting a target value of comparison weighing
When MENU key is pushed,
‘TArGEt‘ message flickers and
Setting mode appears.
The first digit flickers.
To change a digit, use CONVERSION key.
Whenever this key is pushed, a digit is changed.
To move to the next digit to change,
use PRECISION key.
Change a set value by performing
the above procedure repeatedly.
When MENU key is pushed,
‘SET OK’ message appears.
After the setting process finishes,
the scale goes to Comparison Weighing mode
automatically.
With the changed target value, it is possible to make comparison weighing.