Daihan Scientific Ba Series, User Manual

Page: 8 / 43

DAIHAN-Sci.com or ALL for LAB.com Shopping Mall
8/20
DO NOT put the product close to flammable spray lacquer and paint, volatile and
flammable chemicals. A spark of a switch may cause ignition.
DO NOT let an unpermitted person to disassemble or transform the product.
Otherwise, a severe electric trouble may occur, and no warranty service is
provided by DAIHAN Scientific Co., Ltd.
Make sure to use a grounded socket.
DO NOT ground to a gas pipe, a plastic water pipe, or a phone line.
Otherwise, an electric shock, a fire, a failure, or an explosion may occur.
Regularly check that the power plug has dust. Connect the plug completely. If the
plug has dust or is not connected completely, an electric shock or a fire may occur.
If the product is not used long, unplug it for safety. Otherwise, dust may cause
ignition and heating.
To separate the power plug, make sure to hold the plug. If you hold the power
cord only to separate the plug, some internal wires of the cord may have
disconnection which causes ignition.
If abnormal noise or abnormal operation symptom is found in use, immediately
power off the product, unplug, and contact the product supplier or the Technical
Support Team of DAIHAN Scientific Co., Ltd.
To move the product, unplug the product and be careful not to get the power cord
and the product damaged. The damage to the cord may cause an electric shock or
ignition.
To transport the product or store in the high humidity state, check the package
condition before use. If the box or the wood box sinks in water, contact the
Technical Support Team of DAIHAN Scientific Co., Ltd.
DO NOT operate the product until an engineer checks it. Otherwise, an electric
shock or a fire may occur.
DO NOT give a permanent load to the scale. Otherwise, its measuring system
may be damaged.
Overload or a shock reduces the weight load of a container. Strictly avoid
overload or a shock. For a product failure caused by such improper use, no
warranty service is provided by the head office.
Weighing an object and adjusting a weight should be performed at a certain
internal in the range of quality assurance. To do that, a user needs to determine a
proper internal and the characteristics and range of weighing and adjustment.