83
Timing
: You can configure the
Interval Time
and
Period
.
1.
Interval Time
:
Interval from the point when the wiper starts to the point when
the wiper stops.
2.
Period
: Time when the wiper works.
3.
Click
Save
.
Manual
: Turn on and off the wiper manually.
1.
Interval Time
:
Interval from the point when the wiper starts to the point when
the wiper stops.
2.
Click
Start
to get the wiper work in the interval time you have just set, and if you
think the wiper has done enough work, click
Stop
to end it; Click
Once
to get the
wiper work for one round.
4.3.3
Configuring Fan
Select
Setting > Peripheral > Fan
.
Step 1
The
Fan
interface is displayed. See Figure 4-40.
Fan
Figure 4-40
Configure fan’s running mode:
Step 2
Auto
: Fan works automatically. Click
Save
.
Manual
: Start your fan manually. Select the
Enable
check box and click
Save
.
4.3.4
Configuring Heater
Select
Setting > Peripheral > Heater
.
Step 1
The
Heater
interface is displayed. See Figure 4-41.
Heater
Figure 4-41
Configure heater’s running mode:
Step 2
Auto
: Select
Start Tem
and
Stop Tem
as the temperature range for heater to start, and
click
Save
. When the sensor temperature is in the range, heater works automatically.
