Dahua NVR5208-EI User Manual Download Page 368

Page: 368 / 489

The IP address appears on the PPPoE page. You can use this IP address to access the

Device.

When the PPPoE function is enabled, the IP address on the TCP/IP page cannot be

modified.

5.11.10 DDNS

When the IP address of the Device changes frequently, the DDNS function can dynamically refresh

the correspondence between the domain on DNS and the IP address. You can access the Device by

using the domain.

Prerequisites

Check the type of DDNS that the Device supports and then log in to the website provided by the

DDNS service provider to register domain and other information.

After registration, you can log in to the DDNS website to view the information of all the connected

devices under the registered account.

Procedure

Step 1

Select Main Menu > NETWORK > DDNS.

Figure 5-232 DDNS

Step 2

Enable DDNS and then configure the parameters.

After you enable DDNS function, the third-party server might collect your device

information.

User's Manual

352

Summary of Contents for NVR5208-EI










































































































































































































































































































































































































































































































Search results

Summary of Contents for NVR5208-EI

Reviews:

Related manuals for NVR5208-EI

Brands by name

Popular brands

Dahua NVR5208-EI, User Manual

Search results

Summary of Contents for NVR5208-EI

Reviews:

Related manuals for NVR5208-EI

Brands by name

Popular brands