Dahua NAVIGATOR X650 User Manual Download

Page: 91 / 101

Upgrade and Update

This chapter elaborates upgrade methods of the device.

1.19

Firmware Update

The aircraft and remote control have to be enabled and connected during firmware update, in

order to pair them successfully.

Don’t upgrade the firmware during flight!

Update flight control, transmitting and receiving firmware of the aircraft, as well as transmitting

and receiving firmware of the remote control.

Insert the micro SD card with firmware update package into the micro SD card slot of

Step 1

the remote control.

Select “Remote Control > Settings > General Settings”.

Step 2

The system displays “Firmware Update” interface, as shown in Figure 0-1.

Figure 0-1

Select “Update Now”.

Step 3

The system starts to update the firmware.

If micro SD card isn’t inserted, it will display the latest version on the right of each
firmware.

1.20

Remote Control Update

1.20.1 APP Update

Insert the micro SD card with APP update package into the micro SD card slot of the

Step 1

remote control.

Select “Settings > General Settings”.

Step 2

It will display the current APP version number or update software on the right of “APP
Update”, as shown in Figure 0-2.

Summary of Contents for NAVIGATOR X650






































































































Search results

Summary of Contents for NAVIGATOR X650

Reviews:

Related manuals for NAVIGATOR X650

Brands by name

Popular brands

Dahua NAVIGATOR X650, User Manual

Search results

Summary of Contents for NAVIGATOR X650

Reviews:

Related manuals for NAVIGATOR X650

Brands by name

Popular brands