Local Configurations
82
Data usage
Figure 4-64
4.6.2.4 Configuring Switch Settings
After setting up the SWITCH, the device automatically allocates IP addresses to the IPC
directly connected to the PoE port of the device.
CAUTION
By default, the Switch Settings check box is enabled. The network segment is 10.1.1.1. It
is recommended to keep the default setting.
If the IP camera is from the third party, it must support the Onvif protocol and has
enabled DHCP.
In the main menu, select
SYSTEM SETUP > NETWORK > SWITCH
.
Step 1
The Switch interface is displayed. See Figure 4-65.