Dahua MXVR1004 Series User Manual Download Page 213

Page: 213 / 230

Web

Operations

203

obtained again, the GPS module reset times is up to 20, or the Device is rebooted, you can

view the GPS module reset records in the log.



When the GPS module is short-circuited for more than 10 seconds, the module status is

abnormal and the GPS module is automatically powered off and no longer powered on.

After the Device is rebooted, the GPS module will be powered on again.

Satellite information

Figure 5-95

5.7.3 Auto Maintain

You can configure the automatic maintenance settings such as auto reboot, auto deleting old

files, auto booting up, auto shutdown, and delay for auto shutdown.

5.7.3.1 Reboot system

After configuring auto reboot, when the Device is working, it reboots according to the schedule.

Select

Setting > System > Auto Maintain

Step 1

The Auto Maintain interface is displayed, see Figure 5-96.

Summary of Contents for MXVR1004 Series







































































































































































































































Search results

Summary of Contents for MXVR1004 Series

Reviews:

Related manuals for MXVR1004 Series

Brands by name

Popular brands

Dahua MXVR1004 Series, User Manual

Search results

Summary of Contents for MXVR1004 Series

Reviews:

Related manuals for MXVR1004 Series

Brands by name

Popular brands