Web
Operations
132
Manual Add
Figure 5-14
2. Configure TCP/IP parameters. For details, see Table 5-4.
NOTE
The parameters might be different depending on the model you purchased.
Table 5-4 Manual add parameters description
Name
Description
Manufacturer
Select a manufacturer according to the actual situation. Parameters might
vary by manufacture. Follow specific parameters on the interface
IP address
Enter the IP address of remote device
TCP Port
TCP service port. The default setting is 37777. You can configure this
parameter according to your actual situation
RTSP Port
Enter RTSP Port number of remote device. The default setting is 554
HTTP Port
Enter HTTP Port number of remote device. The default setting is 80
Username
Enter the user name and password to login to the remote device
Password
Remote
Channel
Select the channel number that you want to connect
Channel
The channel number of the remotely connected device. You can only select a
channel that has not added remote devices
Decode
buffer
Enter the size of decode buffer. The unit is millisecond and you can select
from 80 through 480
Service type
This must be set up when you select
Onvif
or
Custom
as the
Manufacturer
When selecting different manufacturers, the service types are different.
Select the service type based on your needs
3. Click
Save
.
The device displays in the added device area.
NOTE
indicates connection is successful;
indicates connection
failed.
