Local Configurations
50
Motion detection
Figure 4-31
Select the channel number, and click
to enable the motion detection for
Step 2
the channel.
Configure jitter removal time and enable delay motion detection.
Step 3
If there are multiple alarms during this period, the system records only one alarm
event.
After the delay motion detection is enabled, motion detection begins after a
period of time.
Set detecting area
Step 4
1) Next to
Region
, click
Setup
.
The Area interface is displayed, see Figure 4-32.
The monitoring image is divided to 22×18(PAL) or 22×15(NTSC) blocks.
PAL (Phase Alteration Line) applies to the countries and regions
including China and Europe.
NTSC (Nation Television Standards Committee) applies to the
countries and regions including America and Japan.