30
Figure 3-24 Relay-out
Please refer to the following sheet for log parameter information.
Parameter Function
1
1-ch relay out setup.
“1” means alarm output channel. Select “1” and trigger, then
directly output alarm output signal.
Refresh
View the latest relay out status.
3.4.2 Abnormity
The abnormity interface is shown as in Figure 3-25.
Figure 3-25 Disconnection
Please refer to the following sheet for log parameter information.
Parameter
Function
Enable
Check box to enable this function.
Relay-out
When alarm occurs, set corresponding relay out. You must enable this
function first.
