10
3 Configure
3.1 ITC
3.1.1 Lane Property
User shall set related parameter according to their need.
The lane property interface is shown as in Figure 3-1.
Figure 3-1 Lane Property
Please refer to the following sheet for detailed information.
Parameter
Function
Snap enable
Select lane to enable. The no. corresponds to actual lane no.
Working road
Select road type.
Lane
Select lane to snapshot.
Customized lane no.
Set different no. for each lane.
Direction
Select lane direction to snapshot.
Left lane line type
Solid white line by default.
Right lane line type
Solid white line by default.
Direction
Set vehicle direction.
