21
3.2.1 Attribute
3.2.1.1 General
The general interface is shown as in Figure 3-14. Here you can set camera parameters. For different
models, you shall refer to its parameter. Setup in this interface comes effective immediately.
Figure 3-14 General
Please refer to the following sheet for log parameter information.
Parameter
Function
Brightness
The value adjusts brightness of full image. Default value is 50. The higher the value,
the brighter the image. When image is too bright or too dark, you may adjust this
value. Recommended value is 40~60 within 0~100 range.
Contrast
The value adjusts contrast of full image. Default value is 50. The higher the value, the
higher the contrast of image. When contrast is insufficient, you may adjust this value.
Recommended value is 40~60 within 0~100 range.
Hue
The value adjusts hue of image. Default value is 50. It will not affect image
brightness. It has a relatively fixed value according to the sensor. Recommended
value is 40~60 within 0~100 range.
Saturation
The value adjusts saturation of image. Default value is 50. The higher the value, the
deeper the color. It will not affect image brightness. When WDB is inaccurate, this
value may cause color difference in grey area. Recommended value is 40~60 within
0~100 range.
Day/Night
mode
Switch of color and black&white. It includes color, by brightness and black&white.
