22
Parameter
Function
Prevalue
Set prevalue of day/night switch.
ICR Switch
Apply to sensor IR camera, filter red light during daytime, and switch to normal light
filter at night. Guarantee output of high sensitivity, clear image both at day/night time.
Retate
Normal video rotation of +90, -90 degree.
Note:
This model does not support this function.
Video Tridim Check, ON, to enable 3D NR, lower noise.
Sync signal
Sync signal: Inner sync and outside sync.
When you select outside sync, you can drag slider to set. Outside sync precedes
AC sync signal.
Note:
▶
means current item is used.
3.2.1.2 Shutter
The shutter interface is shown as in Figure 3-15.
Figure 3-15 Shutter
Please refer to the following sheet for log parameter information.
Parameter
Function
Shutter mode
Select: single shutter.
Exposure mode
Select exposure mode: auto and manual. You can set manual exposure mode
as 1/50
～
1/10000. You may also customize.
