Dahua IR High Speed Dome Camera User Manual Download Page 8

Page: 8 / 70

- 7 -



Day&night IR-sensible camera module equiped inside. In the daytime, it

is in color mode, the image is vivid; at night, it turns to Black&white

mode, the image is crisp. Thus, all day long (24hours) monitoring is

realized.



Adopting full-functional high-performance DSP design, performance

stable



Multiple protocol and baudrate supported, high compatibility.



EEPROM data storing method adopted, so that the internally saved

data will not lose when power off



Powerful OSD Menu: 4 kinds of input methods. All the functions of the

Pan/Tilt and the Camera Module can be configured and run through

OSD menu.



128 preset positions for accurate location, 1 Left & Right scan, 4 tours, 4

pattern scan, 8 privacy mask zones.



Support Idle Time function: According to actual requirement, the user

can configure the function that the IR High-speed Dome Camera should

carry out in idle time. The functions that can be set as Idle Time function

includes Invoking Preset Positons, Left & Right scan, Tours etc.



Support wire alarm function, 4 channels in, 1 channel out



Memory recalling function once power on after power off

Summary of Contents for IR High Speed Dome Camera







































































Search results

Summary of Contents for IR High Speed Dome Camera

Reviews:

Related manuals for IR High Speed Dome Camera

Brands by name

Popular brands

Dahua IR High Speed Dome Camera, User Manual

Search results

Summary of Contents for IR High Speed Dome Camera

Reviews:

Related manuals for IR High Speed Dome Camera

Brands by name

Popular brands