- 16 -
Attention:
The adaptor equiped can only be placed indoor or in water-proof
box or other water-proof spaces, it can not be placed directly outdoor,
otherwise water may seep in and damage the adaptor.
F. Put up the wall bracket assembled with IR High-speed dome on the
ancillary hooks: Pull the power cable, video cable and controlling cable out
through the wire-out-going hole of the bracket, then put the assembled on the
two corresponding pegs on the installed peg-board, then push the bracket
downward until it locks in place. Make sure the wall bracket is well fixed with
the installation board, then direct the screw on the bracket to the
corresponding hole on the lower part of the installation board and tighten the
screw.
