Dahua HCVR21**HS-S2 Series, User Manual

Page: 154 / 331

HDCVI Series DVR User
’s Manual
144
Note
You can see this interface after you set IP channel in chapter 4.11.1.3.5. System supports ONVIF
standard protocol.
4.11.1.1.1 Remote Device
In the main menu, from Camera ->Remote, you can go to an interface shown as in Figure 4-64. Here
you can add/delete remote device and view its corresponding information.

IP search: Click it to search IP address. It includes device IP address, port, device name,
manufacturer, type. Use your mouse to click the item name, you can refresh display order. Click IP
address, system displays IP address from small to large. Click IP address again, you can see icon,
system displays IP address from large to small. You can click other items to view information
conveniently. For the network device already added to the device, you can see there is a small icon
“*” after the SN in case there is repeatedly add operation.

Add: Click it to connect to the selected device and add it to the Added device list. Support Batch add.
You can see the corresponding dialogue box if all digital-channel has connected to the front-end.
System can not add new device if the device you want to add has the same IP and TCP port as
the device in the list.

Show filter: You can use it to display the specified devices from the added device.

Edit: Click button or double click a device in the list, you can change channel setup.

Delete: Please select one device in the Added device list and then click to remove.

Status: means connection is OK and means connection failed.

Delete
；
Select a device on the Added device list, click Delete button, system disconnect device first
and then remove its name from the list.

Manual add: Click it to add the IPC manually. The port number is 37777. The default user name is
admin and password is admin.
Figure 4-64